
Safety Valve model D7/S (PN 60)
DN8 (1/4") - DN10 (3/8") | Orifice 7mm
In the Oil & Gas industry, one of the main challenges is ensuring the reliability and compliance of pressure equipment, particularly safety valves (PSV), throughout the lifecycle of the plant. End users typically perform preliminary checks before commissioning and subsequent periodic tests, as required by local regulations, which generally mandate an annual PSV inspection.
These inspections are crucial to ensure that the valves function correctly in the event of overpressure and continue to protect the system after the checks. For this reason, it is essential that the valves are designed with materials and technical solutions that preserve their integrity and functionality even after repeated tests, preventing malfunctions or leaks that could compromise safety and operational efficiency.
In the Oil & Gas industry, operational continuity is critical, as any downtime, even partial, can result in enormous economic losses. Extraction, refining, and transport plants operate with high production margins, moving billions of dollars each year. A failure of a safety valve (PSV) or another critical component can lead to production disruptions, with costs potentially reaching millions of dollars per day. Additionally, sudden plant shutdowns can compromise safety, increasing the risk of accidents and penalties for non-compliance with regulations.
For this reason, choosing reliable and certified components is essential to ensure continuous operation, reduce maintenance downtime, and protect both the financial investment and the safety of the plant.
Nuova General Instruments safety valves are installed in Oil & Gas plants to protect the system from overpressure and ensure operational safety. These valves are typically located near pneumatic actuators that drive shut-off, control, or regulating valves. Their function is to automatically intervene in the event of excessive pressure, preventing damage to the actuator and piping.
They can be installed both on the actuator inlet side and on discharge lines to ensure safe operation of the entire system, particularly in plants with high pressures and critical operating conditions. The safety valve activates when the pressure exceeds the predefined limit, allowing the controlled release of fluid or gas to prevent failures and ensure the proper functioning of the system.
The frequent opening and closing of safety valves, even for short periods, accelerates the wear of seals and contact surfaces, reducing their reliability over time. This can compromise the seal, increasing the need for maintenance and the risk of failures. If the PSV (Pressure Safety Valve) does not operate correctly in the event of overpressure, actuator damage may occur, and in extreme conditions, there is a risk of explosion.
To ensure reliable operation over time, we use high-performance soft seals, designed to provide a hermetic closure even after each valve intervention. This minimizes the risk of leaks and ensures the safety of the system.
The particular design of our seals not only improves the valve's sealing ability but also offers greater resistance to particles and impurities present in the process fluid. This allows our valves to maintain consistent performance, reducing the need for maintenance and ensuring long-lasting protection for the systems.
In Oil & Gas plants, safety valves operate in environments with harsh conditions, including high humidity, extreme temperatures, exposure to aggressive substances, and highly corrosive atmospheres. To ensure reliability and long-lasting performance, it is crucial that the materials used are certified and corrosion-resistant, minimizing the risk of degradation and malfunctions.
Our valves are made with 100% Italian materials, ensuring complete traceability and maximum quality. All components are selected to withstand the harshest environments typical of the Oil & Gas industry, ensuring safety and reliability over time.
The use of special corrosion-resistant steels and 316L stainless steel guarantees optimal performance even in the presence of aggressive agents, saline humidity, or extreme temperatures. For pressure parts, a material certificate 3.1 is available upon request.
In Oil & Gas plants, pneumatic actuators on ball valves and other large valves often operate in confined spaces, where every component must be optimized to ensure efficiency without compromising safety. The installation of safety valves (PSVs) in these systems can be complex due to restricted layouts and plant configurations, requiring compact and reliable solutions.
Nuova General safety valves for Oil & Gas actuators are designed to fit in tight spaces without sacrificing performance. Their compact design allows for easy integration onto pneumatic actuators, ensuring effective protection against overpressure. Thanks to their optimized structure, they facilitate installation and maintenance, reducing the footprint while ensuring reliable operation even in space-constrained environments.
In the Oil & Gas industry, the geographical location of plants directly impacts the certifications required for safety valves and pneumatic actuators. Plants located in Russia, Belarus, Kazakhstan, Armenia, and Kyrgyzstan must obligatorily comply with the EAC (EurAsian Conformity) certification, which ensures compliance with local technical standards and allows operation in these markets.
On the other hand, plants located in North America and global projects with U.S. standards, such as those in the Middle East, must adhere to ASME regulations, specifically ASME VIII/ASME XIII for pressure equipment and ASME B31.3 for process piping, to ensure the structural integrity and operational safety of equipment.
Proper certification of safety valves is therefore a crucial aspect of providing reliable components based on the geographical location of the plant.
DN8 (1/4") - DN10 (3/8") | Orifice 7mm
DN10 (3/8") - DN15 (1/2") | Orifice 10mm
DN15 (1/2") - DN20 (3/4") | Orifice 14mm
DN20 (3/4") - DN25 (1") | Orifice 20mm
DN10 (3/8") - DN15 (1/2") | Orifice 10mm
DN15 (1/2") - DN20 (3/4") - DN25 (1") | Orifice 13,5mm
DN15 (1/2") - DN20 (3/4") | Orifice 10mm
Choosing a Nuova General Instruments safety valve means relying on a product designed and manufactured according to the highest quality and safety standards. In addition to our years of experience and continuous focus on innovation, we offer a range of dedicated services to support our customers at every stage, from product selection to after-sales assistance:
• ⚡ Fast Delivery: Standard production within 10 business days, with a Fast Track option for shipments in just 5 days.
• 📦 Flexible Lot Sizes: We provide both single valves and large batches up to 1000 units, always ensuring top quality.
• 🎨 Customization: Laser marking, colored caps for calibration identification, and removable barcode labels for simplified management.
• ✅ Third-Party Testing: Option to obtain 3.2 test certificates from prestigious organizations such as INAIL, TUV, RINA, LLOYD, DNV, and ABS.
• 📄 Online Certificates: Immediate and unlimited access to technical documentation of the valves through our dedicated portal.
• 🛠️ Product Samples: Ability to test our valves before placing regular orders, with specialized technical support.