Valves > Safety valves > Piped discharge > G15

G15

G15 stainless steel
G15/L stainless steel
G15/P stainless steel
G15/S stainless steel
G15 brass
G15/L brass
G15/S brass
Tipo :
Type :
G15 do: 15mm Area: 176.71mm2
Omologazione
Homologation
PN Coefficiente efflusso ridotto
Reduced flow coefficient
Campo di taratura
Setting range
CE - UKCA 25 0,69 0,3 - 16,0 bar
EAC 25 0,69 0,3 - 16,0 bar
ATEX Ex h II 2 Gb - UKEX 25 0,69 0,3 - 16,0 bar
ATEX Ex h II 2 Db - UKEX (1) 25 0,69 0,3 - 16,0 bar
ASME XIII - CRN (Canada) / / /
SELO - TSG / / /
CONFIGURAZIONE - CONFIGURATION
Materiale
Material
Ottone
Brass
Mista Ottone-Acciaio inox
Mixed Brass-Stainless steel
Acciaio inox
Stainless steel
Modelli
Model
Con ghiera Con ghiera Con ghiera
With ring nut With ring nut With ring nut
Senza Ghiera Senza Ghiera Senza Ghiera
Without ring nut Without ring nut Without ring nut
Con leva Con leva Con leva
With lever With lever With lever
/ / Con apertura pneumatica
/ / With pneumatic opening
/ / Pneumatica con sensore
/ / Pneumatic with sensor
Sedi di Tenuta
Seal System
N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C
E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C
VITON -20 / +200 °C VITON -20 / +200 °C VITON -20 / +200 °C
SILICONE -60 / +200 °C SILICONE -60 / +200 °C SILICONE -60 / +200 °C
PTFE -196 / +250 °C PTFE -196 / +250 °C PTFE -196 / +250 °C
KALREZ -20 / +250 °C KALREZ -20 / +250 °C KALREZ -20 / +275 °C
/ Metal -196 / +250 °C Metal -196 / +450 °C
Connessione Entrata
Inlet Connection
G.1/2" - 3/4" - 1" ISO228 G.1/2" - 3/4" - 1" ISO228 G.1/2" - 3/4" - 1" ISO228
R.1/2" - 3/4" - 1" EN10226 R.1/2" - 3/4" - 1" EN10226 R.1/2" - 3/4" - 1" EN10226
1/2" - 3/4" - 1" NPT 1/2" - 3/4" - 1" NPT 1/2" - 3/4" - 1" NPT
/ 1" - 1"1/2 Tri Clamp 1" - 1"1/2 Tri Clamp
/ DN25 DIN405-11851 DN25 DIN405-11851
/ DN15-20-25 PN16-40 DN15-20-25 PN16-40
/ 1/2" - 3/4" - 1" 150-300 lb 1/2" - 3/4" - 1" 150-300 lb
Connessione Uscita
Outlet Connection
G.1" ISO228 G.1" ISO228 G.1" ISO228
/ 1"1/2 Tri Clamp 1"1/2 Tri Clamp
/ DN25 DIN405-11851 DN25 DIN405-11851
/ DN25 PN16-40 DN25 PN16-40
/ 1" 150-300 lb 1" 150-300 lb
/ / /
/ / /
A richiesta possono essere eseguiti collaudi dai più prestigiosi enti quali: INAIL (area ISPESL), TÜV, RINA, Bureau Veritas, ABS e Lloyd
On request tests can be made by the most prestigious societies, such as: INAIL (area ISPELS), TÜV, RINA, Bureau Veritas, ABS and Lloyd Register.
Note: (1) No Modello Con leva / No Model With lever

Piped discharge safety valve in brass, inox 316L or mixed

G15
G15/L
G15/P
G15/S