Valvole di Sicurezza > Scarico Convogliato > G10

G10

G10 inox
G10/L inox
G10/P inox
G10/S inox
G10 ottone
G10/L ottone
G10/S ottone
Tipo :
Type :
G10 do: 10mm Area: 78,50mm2
Omologazione
Homologation
PN Coefficiente efflusso ridotto
Reduced flow coefficient
Campo di taratura
Setting range
E.D. 2014/68/EU IV Cat.(PED) 40 0,85 0,3 - 30,0 bar
EAC 40 0,85 0,3 - 30,0 bar
ATEX Ex II 2 G c 40 0,85 0,3 - 30,0 bar
ATEX Ex II 2 D c (1) 40 0,85 0,3 - 30,0 bar
ASME VIII Div.1 40 0,629 1,0 - 40,0 bar
Canadian Reg. CRN 40 0,629 1,0 - 40,0 bar
CONFIGURAZIONE - CONFIGURATION
Materiale
Material
Ottone
Brass
Mista Ottone-Acciaio inox
Mixed Brass-Stainless steel
Acciaio inox
Stainless steel
Modelli
Model
Con ghiera Con ghiera Con ghiera
With ring nut With ring nut With ring nut
Senza Ghiera Senza Ghiera Senza Ghiera
Without ring nut Without ring nut Without ring nut
Con leva Con leva Con leva
With lever With lever With lever
/ / Con apertura pneumatica
/ / With pneumatic opening
/ / Pneumatica con sensore
/ / Pneumatic with sensor
Sedi di Tenuta
Seal System
N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C
E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C
VITON -20 / +200 °C VITON -20 / +200 °C VITON -20 / +200 °C
SILICONE -60 / +200 °C SILICONE -60 / +200 °C SILICONE -60 / +200 °C
PTFE -196 / +250 °C PTFE -196 / +250 °C PTFE -196 / +250 °C
KALREZ -20 / +250 °C KALREZ -20 / +250 °C KALREZ -20 / +275 °C
/ Metal -196 / +250 °C Metal -196 / +450 °C
Connessione Entrata
Inlet Connection
G.3/8"-1/2"-3/4"-1"ISO228 G.3/8"-1/2"-3/4"-1"ISO228 G.3/8"-1/2"-3/4"-1"ISO228
R3/8"-1/2"-3/4"-1"EN10226 R3/8"-1/2"-3/4"-1"EN10226 R3/8"-1/2"-3/4"-1"EN10226
3/8" - 1/2" - 3/4" - 1" NPT 3/8" - 1/2" - 3/4" - 1" NPT 3/8" - 1/2" - 3/4" - 1" NPT
DN15-20-25 PN16-40 1" - 1"1/2 Tri Clamp 1" - 1"1/2 Tri Clamp
1/2" - 3/4" - 1" 150-300 lb DN25 DIN405-11851 DN25 DIN405-11851
/ DN15-20-25 PN16-40 DN15-20-25 PN16-40
/ 1/2" - 3/4" - 1" 150-300 lb 1/2" - 3/4" - 1" 150-300 lb
Connessione Uscita
Outlet Connection
G.1" ISO228 G.1" ISO228 G.1" ISO228
DN25 PN16-40 1" - 1"1/2 Tri Clamp 1" - 1"1/2 Tri Clamp
1" 150-300 lb DN25 DIN405-11851 DN25 DIN405-11851
/ DN25 PN16-40 DN25 PN16-40
/ 1" 150-300 lb 1" 150-300 lb
/ / /
/ / /
A richiesta possono essere eseguiti collaudi dai più prestigiosi enti quali: INAIL (area ISPESL), TÜV, RINA, Bureau Veritas, ABS e Lloyd
On request tests can be made by the most prestigious societies, such as: INAIL (area ISPELS), TÜV, RINA, Bureau Veritas, ABS and Lloyd Register.
Note: (1) No Modello Con leva / No Model With lever
G10
G10/L
G10/P
G10/S