Valvole > Valvole di Sicurezza > Scarico Convogliato > G20

G20

G20 ottone
G20/L ottone
G20/S ottone
G20 inox
G20/L inox
G20/P inox
G20/S inox
Tipo :
Type :
G20 do: 20 mm Area: 314,00mm2
Omologazione
Homologation
PN Coefficiente efflusso ridotto
Reduced flow coefficient
Campo di taratura
Setting range
CE - UKCA 60 0,83 0,3 - 60,0 bar
EAC 60 0,83 0,3 - 60,0 bar
ATEX Ex h II 2 Gb - UKEX 60 0,83 0,3 - 60,0 bar
ATEX Ex h II 2 Db - UKEX (1) 60 0,83 0,3 - 60,0 bar
ASME XIII - CRN (Canada) 60 0,629 1,0 - 60,0 bar
SELO - TSG 60 0,629 1,0 - 60,0 bar
CONFIGURAZIONE - CONFIGURATION
Materiale
Material
Ottone
Brass
Mista Ottone-Acciaio inox
Mixed Brass-Stainless steel
Acciaio inox
Stainless steel
Modelli
Model
Con ghiera Con ghiera Con ghiera
With ring nut With ring nut With ring nut
Senza Ghiera Senza Ghiera Senza Ghiera
Without ring nut Without ring nut Without ring nut
Con leva Con leva Con leva
With lever With lever With lever
/ / Con apertura pneumatica
/ / With pneumatic opening
/ / Pneumatica con sensore
/ / Pneumatic with sensor
Sedi di Tenuta
Seal System
N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C
E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C
VITON -20 / +200 °C VITON -20 / +200 °C VITON -20 / +200 °C
SILICONE -60 / +200 °C SILICONE -60 / +200 °C SILICONE -60 / +200 °C
PTFE -196 / +250 °C PTFE -196 / +250 °C PTFE -196 / +250 °C
KALREZ -20 / +250 °C KALREZ -20 / +250 °C KALREZ -20 / +275 °C
/ Metal -196 / +250 °C Metal -196 / +450 °C
Connessione Entrata
Inlet Connection
G.1" - 1"1/4 ISO228 G.1" - 1"1/4 ISO228 G.1" - 1"1/4 ISO228
G.1" - 1"1/4 ISO228 F G.1" - 1"1/4 ISO228 F G.1" - 1"1/4 ISO228 F
R.1" - 1"1/4 EN10226 R.1" - 1"1/4 EN10226 R.1" - 1"1/4 EN10226
1" - 1"1/4 NPT 1" - 1"1/4 NPT 1" - 1"1/4 NPT
/ 1" - 1"1/2 Tri Clamp 1" - 1"1/2 Tri Clamp
/ DN25-32-40 DIN405-11851 DN25-32-40 DIN405-11851
/ DN20-25-32 PN16-40 DN20-25-32 PN16-40
/ 1" - 1"1/2 150-300 lb 1" - 1"1/2 150-300 lb
Connessione Uscita
Outlet Connection
G.1"1/4 ISO228 G.1"1/4 ISO228 G.1"1/4 ISO228
/ 1"1/2 Tri Clamp 1"1/2 Tri Clamp
/ DN25-32-40 DIN405-11851 DN25-32-40 DIN405-11851
/ DN32-40 PN16-40 DN32-40 PN16-40
/ 1"1/4 - 1"1/2 - 2" 150-300 lb 1"1/4 - 1"1/2 - 2" 150-300 lb
/ / /
/ / /
A richiesta possono essere eseguiti collaudi dai più prestigiosi enti quali: INAIL (area ISPESL), TÜV, RINA, Bureau Veritas, ABS e Lloyd
On request tests can be made by the most prestigious societies, such as: INAIL (area ISPELS), TÜV, RINA, Bureau Veritas, ABS and Lloyd Register.
Note: (1) No Modello Con leva / No Model With lever

Valvola di sicurezza a scarico convogliabile in ottone, inox 316L o mista

G20
G20/L
G20/P
G20/S