Valvole di Sicurezza > Scarico Convogliato > G40

G40

G40 inox
G40/L inox
G40/P inox
G40/S inox
Tipo :
Type :		 G40 do: 40mm Area: 1256,00mm2
Omologazione
Homologation		 PN Coefficiente efflusso ridotto
Reduced flow coefficient		 Campo di taratura
Setting range
CE - UKCA 40 0,61; >3 bar 0,71 0,3 - 14,0 bar
EAC 40 0,61; >3 bar 0,71 0,3 - 14,0 bar
ATEX Ex h II 2 Gb - UKEX 40 0,61; >3 bar 0,71 0,3 - 14,0 bar
ATEX Ex h II 2 Db - UKEX (1) 40 0,61; >3 bar 0,71 0,3 - 14,0 bar
ASME XIII - CRN (Canada) 40 0,629 1,0 - 14,0 bar
SELO - TSG 40 0,629 1,0 - 14,0 bar
CONFIGURAZIONE - CONFIGURATION
Materiale
Material		 Ottone
Brass		 Mista Ottone-Acciaio inox
Mixed Brass-Stainless steel		 Acciaio inox
Stainless steel
Modelli
Model		 Con ghiera Con ghiera Con ghiera
With ring nut With ring nut With ring nut
Senza Ghiera Senza Ghiera Senza Ghiera
Without ring nut Without ring nut Without ring nut
Con leva Con leva Con leva
With lever With lever With lever
/ / Con apertura pneumatica
/ / With pneumatic opening
/ / Pneumatica con sensore
/ / Pneumatic with sensor
Sedi di Tenuta
Seal System		 N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C
E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C
VITON -20 / +200 °C VITON -20 / +200 °C VITON -20 / +200 °C
SILICONE -60 / +200 °C SILICONE -60 / +200 °C SILICONE -60 / +200 °C
PTFE -196 / +250 °C PTFE -196 / +250 °C PTFE -196 / +250 °C
KALREZ -20 / +250 °C KALREZ -20 / +250 °C KALREZ -20 / +275 °C
/ Metal -196 / +250 °C Metal -196 / +450 °C
Connessione Entrata
Inlet Connection		 G.1"1/2 - 2" ISO228 G.1"1/2 - 2" ISO228 G.1"1/2 - 2" ISO228
R.1"1/2 - 2" EN10226 R.1"1/2 - 2" EN10226 R.1"1/2 - 2" EN10226
1"1/2 - 2" NPT 1"1/2 - 2" NPT 1"1/2 - 2" NPT
/ 2" Tri Clamp 2" Tri Clamp
/ DN40-50 DIN405-11851 DN40-50 DIN405-11851
/ DN40-50-65 PN16-40 DN40-50-65 PN16-40
/ 2" - 2"1/2 150 lb 2" - 2"1/2 150 lb
Connessione Uscita
Outlet Connection		 G.2" ISO228 G.2" ISO228 G.2" ISO228
/ 2" Tri Clamp 2" Tri Clamp
/ DN50 DIN405-11851 DN50 DIN405-11851
/ DN50-65 PN16-40 DN50-65 PN16-40
/ 2" - 2"1/2 -3" 150 lb 2" - 2"1/2 -3" 150 lb
/ / /
/ / /
A richiesta possono essere eseguiti collaudi dai più prestigiosi enti quali: INAIL (area ISPESL), TÜV, RINA, Bureau Veritas, ABS e Lloyd
On request tests can be made by the most prestigious societies, such as: INAIL (area ISPELS), TÜV, RINA, Bureau Veritas, ABS and Lloyd Register.
Note: (1) No Modello Con leva / No Model With lever (1) No Modello Con leva / No Model With lever
G40
G40/L
G40/P
G40/S