Valvole di Sicurezza > Alta Pressione > E10/L

E10/L

E10/L ottone
E10/LS ottone
E10/L inox
E10/LS inox
Tipo :
Type :
E10/L do: 10mm Area: 78,50mm2
Omologazione
Homologation
PN Coefficiente efflusso ridotto
Reduced flow coefficient
Campo di taratura
Setting range
E.D. 2014/68/EU IV Cat.(PED) 100 0,86 0,3 - 100,0 bar
EAC 100 0,86 0,3 - 100,0 bar
ATEX Ex II 2 G c 100 0,86 0,3 - 100,0 bar
ATEX Ex II 2 D c 100 0,86 0,3 - 100,0 bar
ASME VIII Div.1 150 0,629 1,0 - 106,0 bar
Canadian Reg. CRN 150 0,629 1,0 - 106,0 bar
CONFIGURAZIONE - CONFIGURATION
Materiale
Material
Ottone
Brass
Mista Ottone-Acciaio inox
Mixed Brass-Stainless steel
Acciaio inox
Stainless steel
ModelliModel Con ghiera Con ghiera Con ghiera
With ring nut With ring nut With ring nut
Senza Ghiera Senza Ghiera Senza Ghiera
Without ring nut Without ring nut Without ring nut
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
Sedi di TenutaSeal System N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C N.B.R. (Std) -10 / + 100 °C
E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C E.P.D.M. -50 / + 150 °C
VITON -20 / +200 °C VITON -20 / +200 °C VITON -20 / +200 °C
SILICONE -60 / +200 °C SILICONE -60 / +200 °C SILICONE -60 / +200 °C
PTFE -196 / +250 °C PTFE -196 / +250 °C PTFE -196 / +250 °C
KALREZ -20 / +250 °C KALREZ -20 / +250 °C KALREZ -20 / +275 °C
/ Metal -196 / +250 °C Metal -196 / +450 °C
Connessione EntrataInlet Connection G.1/2" - 3/4" ISO228 G.1/2" - 3/4" ISO228 G.1/2" - 3/4" ISO228
R.1/2" - 3/4" EN10226 R.1/2" - 3/4" EN10226 R.1/2" - 3/4" EN10226
1/2" - 3/4" NPT 1/2" - 3/4" NPT 1/2" - 3/4" NPT
DN20-25 PN16-100 1" - 1"1/2 Tri Clamp 1" - 1"1/2 Tri Clamp
3/4" - 1" 150-900 lb DN20-25 PN16-100 DN20-25 PN16-100
/ 3/4" - 1" 150-900 lb 3/4" - 1" 150-900 lb
/ / /
Connessione UscitaOutlet Connection G.1" ISO228 G.1" ISO228 G.1" ISO228
DN25 PN16-100 1"1/2 Tri Clamp 1"1/2 Tri Clamp
1" 150-900 lb DN25 DIN405-11851 DN25 DIN405-11851
/ DN25 PN16-100 DN25 PN16-100
/ 1" 150-900 lb 1" 150-900 lb
/ / /
/ / /
A richiesta possono essere eseguiti collaudi dai più prestigiosi enti quali: INAIL (area ISPESL), TÜV, RINA, Bureau Veritas, ABS e Lloyd
On request tests can be made by the most prestigious societies, such as: INAIL (area ISPELS), TÜV, RINA, Bureau Veritas, ABS and Lloyd Register.
Note:
E10/L
E10/LS